Concrete Volume Calculator (cubic yards with waste)
Add each pour element: slab, footing, wall, rectangular or round column. The drawing and totals update as you type. The calculation runs in your browser. A free account is needed after 3 calculations and to download results. Saving a project stores the inputs with your account.
Guide: Concrete Volume
- Load the sample to see typical inputs, then replace every value with your project data.
- Check the units shown next to each input.
- Results and the drawing update as you type. Read the step-by-step table and any warnings.
Code basis and design decisions
- Volume: slab and footing V = L × W × t/12; wall V = L × H × t/12 minus openings × t/12; rectangular column V = (b/12)(d/12)h; round V = π/4 (D/12)2 h. 1 yd3 = 27 ft3.
- Waste factor: your choice (5 to 10 % is common). The order quantity rounds up to 1/4 yd3.
- Bags: typical packaged-mix yields of 0.30, 0.45 and 0.60 ft3 for 40, 60 and 80 lb bags. Check the bag you buy.
- Geometry only: no code check. A slab under 3.5 in (a common slab-on-ground minimum) is flagged.
Notes & limits
- Volumes are neat-line geometry. Thickened slab edges, haunches, sloped footings and over-excavation need their own elements.
- Confirm ready-mix minimum loads and short-load charges with the supplier.