Plumbing

Water and drainage piping

New to these tools?Try a worked example →

Choose an app

How these tools work

Water Supply Sizing

FBC-P 2023 Section 604 / Appendix E

Water supply sizing from your fixtures: fixture units, demand, Hazen-Williams friction, velocity and pressure at the critical fixture.

3 free calculations

Open app →

Drain Fixture Units

FBC-P 2023 Sections 709, 710

Total drainage fixture units for fixtures picked by name and check them against the allowable DFU for the pipe; Manning full-flow capacity shown for information.

3 free calculations

Open app →

Storm/Roof Drain

FBC-P 2023 Chapter 11, Section 1106 / Equation 11-1

Roof and storm drain checks from your roof area and rainfall rate: design flow by Equation 11-1 and a pass/fail for each leader, drain and sewer.

3 free calculations

Open app →

Gas Pipe Sizing

FBC Fuel Gas 2023 (IFGC 2021) Section 402.4, longest length

Gas pipe sizing by the IFGC 402.4 low- and high-pressure equations (longest-length method) for natural gas and LP in Schedule 40 steel, copper tube Type K/L and PE.

3 free calculations

Open app →

Water Heater Sizing

Heat balance: storage and recovery, tankless

Storage volume, recovery and input for a peak period, or tankless input for a peak flow, in Btu/h and kW.

3 free calculations

Open app →

Sump Pump Sizing

Hazen-Williams, pump cycle volume

Design flow, total dynamic head, basin working volume and pump-down depth, with an optional pump-curve check.

3 free calculations

Open app →

Water Hammer (Surge)

Joukowsky / Korteweg / Michaud

Pressure wave speed, critical closure time, Joukowsky or slow-closure surge, and maximum and minimum pressure against the rating.

3 free calculations

Open app →

Pipe Thermal Expansion and Loop

Copper Tube Handbook (CDA); Spears thermal expansion data

Length change between anchors and the expansion loop or offset length for copper, PVC, CPVC and steel pipe.

3 free calculations

Open app →

Pump Total Dynamic Head

Darcy-Weisbach with Colebrook-White; Hazen-Williams as NFPA 13 28.2.2.1.1

System curve, Darcy or Hazen-Williams friction, and optional NPSHa.

3 free calculations

Open app →