Stormwater Site Design Calculator BETA NRCS curve number and unit hydrograph, Muskingum-Cunge reaches, storage-indication ponds
US customary units. Runs, pre vs. post, Auto-size and the report are for members with an OTW Pro or OTW Team plan. See plans.
Open the app It opens with the worked example (Maple Ridge Commons). Signed out, or without the plan, you can look at its inputs and saved results; members with the plan edit and run their own.
What the app does
- Network: drainage areas, entered inflow hydrographs, junctions, ponds, pipes, channels and outfalls on a canvas, optionally drawn over a calibrated site plan (areas, pond footprints and reach lengths measured from the plan).
- Runoff: NRCS curve number runoff with the NRCS unit hydrograph (NEH 630 Ch. 10 and 16); storms from the NRCS 24-hour types, NOAA Atlas 14 temporal distributions (with the percentile picker) or the FDOT distributions.
- Routing: Muskingum-Cunge reaches and storage-indication ponds with orifices, risers, weirs, V-notch weirs and rating tables (FHWA HEC-22 4th ed. Ch. 10). Backwater between ponds is not modeled; a surcharged pipe is flagged as a warning (HGL and backwater analysis come later).
- Pre vs. post: Existing and Proposed scenarios as overrides of one model, with a peak comparison table at the points you choose.
- Auto-size: sizes the pond outlets (and optionally the pond footprint or depth) so post-development peaks stay at or below pre-development for the storms you pick, within your freeboard and stage limits (defaults: post may not exceed pre, 1.0 ft freeboard, smallest orifice 3 in); shows every iteration, writes the result to the model and can be undone.
- Outputs: a PDF report (project information, network over the site plan, inputs, storms, results and hydrographs, stage-storage-discharge tables, checks, general and design notes, design-table version, methods and references), CSV tables and a DXF in plan coordinates. Every table and default lives in the editable design tables.