Photometric Lighting Calculator BETA Point-by-point illuminance from IES photometry, interactive fixture layout, interior and site

IES LM-63Inverse-square point methodIES RP-8 parking basisLumen method check

US customary units (feet, footcandles). Placing fixtures, the live plan, engine runs and the PDF, CSV and DXF exports work signed out under the same limits as the other apps; Auto-layout is for members with OTW Pro or OTW Team, and members also keep their runs.

Open the app It opens with a starting layout for a 40 x 30 ft open office; switch to Site / parking for a lot.

What the app does
  • Space and target: an interior room (length, width, ceiling, mounting and workplane heights, surface reflectances) or a site area (a rectangle or an outline you draw), with a target from the space-type table: average footcandles, minimum, and the avg:min and max:min uniformity limits. Every value can be edited.
  • Fixtures: a library of generic troffers, high bays and area lights, or your own IES LM-63 file (Type C photometry) from the fixture maker. Lumens, watts and the light loss factor can be changed.
  • Interactive layout: place, drag, rotate, duplicate and delete fixtures on the plan; the color map, iso lines, point values and the PASS / FAIL check update as you edit.
  • Calculation: direct illuminance point by point (E = I cosγ / d², candela interpolated from the IES table, symmetry honored), plus an optional uniform interreflected estimate indoors. A lumen-method count is shown as a cross-check.
  • Auto-layout (OTW Pro or OTW Team): starts from the lumen method, then refines the count and arrangement with the point calculation until the average, minimum and uniformity all pass, and picks the lowest-lumen package in the fixture's family that does.
  • Outputs: a PDF report (plan with color map, iso lines and values, results and checks, fixture schedule and method), the grid values as CSV and the plan as a DXF in feet. Every table and default lives in editable CSV design tables.