Lift Station Design Suite BETA Duplex or triplex submersible station: pump and system curves, wet well, force main and a sheet set

Hazen-WilliamsWet well V = TQ/4Pump and system curvesEditable design tables

US customary units. The design runs on the OTW server as you edit, for members with an OTW Pro or OTW Team plan. See plans.

Open the app It opens with a worked example (Maple Street Lift Station LS-1, fictitious). Signed out, or without the plan, you can look at its inputs and saved results; members with the plan edit and run their own.

What the app does
  • Station on a canvas: wet well, duplex or triplex submersible pumps, valve vault, control panel, standby generator, influent sewer and discharge manhole as objects you place and edit.
  • Hydraulics: peak flow from the average flow and peak factor, force main Hazen-Williams friction and minor losses (K values), total dynamic head, and the system curves at both static extremes against the pump curve you enter, with the duty points; for a triplex station, the combined curve of the two duty pumps in parallel is checked against the peak flow.
  • Wet well: working volume V = TQ/4 for the minimum cycle time, pump off, lead and lag on and high alarm levels, cycle time at minimum and average flow, and buoyancy.
  • Checks: force main velocity limits, levels against the high water level, force main detention (septicity) at minimum flow and the other checks, each PASS or FAIL with its source; limits are OTW engineering defaults you can edit and the reviewing agency's criteria govern.
  • Outputs: a sheet set (plan, wet well section, pump curve, notes and results), project files you can save and open, and notes drawn from the editable notes table. Every table and default lives in editable CSV design tables.
  • Beta scope: duplex and triplex stations with identical pumps; odor control, variable-speed operation and electrical design are not covered. The Lift Station quick app covers duplex and triplex sizing in one form.