Wind Main Frame (MWFRS)
ASCE 7-22 Ch. 27 & 28 / FBC 2023 Sec. 1609ASCE 7-22 and FBC 2023 main wind force resisting system pressures: Kz, Kzt, Ke, qh, directional and low-rise envelope, minimum case, with ASD 0.6W.
3 free calculations
Loads, wood and steel members
ASCE 7-22 and FBC 2023 main wind force resisting system pressures: Kz, Kzt, Ke, qh, directional and low-rise envelope, minimum case, with ASD 0.6W.
3 free calculations
ASCE 7-22 and FBC 2023 components and cladding wind pressures by zone and effective wind area, with ASD 0.6W.
3 free calculations
Every ASCE 7-22 Chapter 2 LRFD and ASD load combination, with governing max and min and the code section on each line. IBC/FBC 1605.
3 free calculations
Minimum floor and roof live loads by structure type, from FBC 2023 Table 1607.1 (ASCE 7-22 loading), with a one-page PDF.
3 free calculations
NDS 2024 checks for sawn, glulam and LVL beams, joists and headers: bending, shear at d, bearing and deflection with creep.
3 free calculations
NDS 2018 wood post and column check: axial with column stability factor CP, bearing, and combined bending and axial. ASD and LRFD.
3 free calculations
Sawn-lumber joist and rafter span check to NDS 2018: bending, shear, bearing, live and total deflection, max allowable span.
3 free calculations
AISC 360-22 W-shape beam check: yielding, lateral-torsional buckling with Cb, flange local buckling, shear and deflection. LRFD/ASD.
3 free calculations
AISC 360-22 steel column check for W shapes, HSS and pipe: compression (Chapter E) and combined axial and flexure (H1).
3 free calculations
ASCE 7-22 Sec. 12.8 equivalent lateral force: SDC, Cs and its limits, base shear, story forces, overturning and drift.
3 free calculations
ACI 318-19 isolated spread footing: bearing with lift-off, one-way and punching shear, flexure and reinforcement.
3 free calculations
Cantilever reinforced-concrete retaining wall: IBC 2024 / FBC 2023 1807.2.3 stability and bearing, ACI 318-19 stem, toe and heel design.
3 free calculations
Plane truss analysis by the direct stiffness method: Pratt, Howe, Fink, scissor and king-post generators or custom geometry, member forces, reactions and deflection.
3 free calculations
Monument, pylon, billboard and wall signs: ASCE 7-22 Ch. 29 wind on the sign, steel posts and piers, monument footings, and wall anchors or screws.
3 free calculations
ASCE 7-22 Chapter 7 roof snow loads: flat, sloped, minimum, rain-on-snow, unbalanced and drift loads.
3 free calculations
Wood structural panel shear walls (segmented and perforated) and diaphragms per AWC SDPWS-2021, ASD and LRFD for wind and seismic.
3 free calculations
Cubic yards for slabs, footings, walls and columns, with a waste factor, order quantity and bag counts.
3 free calculations
Bar counts by spacing, bar lists, laps and stock lengths, and weight in pounds and tons for #3 to #18 bars.
3 free calculations
Flexure, shear and stirrups, bar spacing, cover, minimum depth and deflection for rectangular and T-beams.
3 free calculations
Runway beams for bridge cranes: crane impact and lateral loads, moving wheel moments, biaxial bending, web local checks, deflection and fatigue.
3 free calculations
Axial capacity of one helical pile or anchor: helix bearing in clay or sand, torque correlation, product limits, allowable load and required installation torque.
3 free calculations
Loads on one roof attachment of a rail-mounted PV array and lag screw withdrawal into the rafter, with the attachment maker's rated values.
3 free calculations
Out-of-plane check of a solid tilt-up or precast panel strip: P-delta magnified moment, phi Mn, axial limit and service deflection.
3 free calculations
Loads on one ground-mount pile, embedment for lateral load by IBC Eq. 18-1, uplift by skin friction and compression.
3 free calculations
Wind on a solid or mostly solid fence or freestanding wall: Case A line posts, Case C end zones, post bending and footing embedment.
3 free calculations
Draft clear-span gable rigid frame with prismatic members. Not an MBMA design.
3 free calculations
NDS dowel-yield modes and withdrawal for nails, screws, lags, and bolts.
3 free calculations
Concentric axial compression plate thickness after AISC Design Guide 1. Anchor design is out of scope.
3 free calculations