Engineering aid only. Professional verification required. The method notes and tags on this page are the references this app cites.
By running a calculation you agree to the Terms of Use and Privacy Policy. Results are preliminary and must be verified by a licensed professional.
US customary units (ft, mph, percent grades).
Method, assumptions and limits
Method: AASHTO A Policy on Geometric Design of Highways and Streets, 7th edition (2018), Chapter 3. Stopping sight distance: SSD = 1.47 V t + 1.075 V2/a (Eq 3-2; V mph, t s, a ft/s2), and on a grade the braking term V2/(30 [a/32.2 ± G]) (Eq 3-3). The design SSD is the Table 3-1 value: the two distances rounded to 0.1 ft, added, then rounded up to the next 5 ft. Passing sight distance: Table 3-4 (20-80 mph, two-lane highways, crest curves only). Crest length: L = A S2/2158 (SSD, eye 3.5 ft, object 2.0 ft) or A S2/2800 (PSD, 3.5 ft and 3.5 ft) for S < L, and L = 2S − 2158/A (or 2800/A) for S > L. Sag length (headlight, 2.0 ft, 1° beam): L = A S2/(400 + 3.5 S) for S < L and L = 2S − (400 + 3.5 S)/A for S > L. K = L/A; the design K is reported with the Table 3-35 (crest SSD), 3-36 (crest PSD) or 3-37 (sag) value for the speed. Geometry: symmetrical parabola, PVC = PVI − L/2, y = yPVC + g1x/100 + (g2 − g1)x2/(200L), high or low point at x = −g1L/(g2 − g1). US units; grades in percent; stations in feet (2+50 = 250).
Required inputs, no hidden defaults: design speed, the criterion (ssd or psd), and both grades (g1 entering, g2 leaving, percent, uphill positive). Stations and elevations need the PVI station and elevation. Defaults, each echoed in "defaults used" and warned: brake reaction time 2.5 s, deceleration 11.2 ft/s2, eye height 3.5 ft, object height 2.0 ft (SSD) or 3.5 ft (PSD), headlight height 2.0 ft, beam 1° (sag), and rounding the design length up to 10 ft (only when you do not enter a length). Changing them is allowed and warned.
Length: leave the length blank to get a design length (the larger of design K × A, the 3V minimum and, for sag, the comfort length, rounded up). Enter a length to check it: the sight-distance length (exact S < L / S > L equation), the Green Book design K of Table 3-35, 3-36 or 3-37 (whenever a table K applies to the speed, criterion and standard heights) and, for sag, comfort are gating checks; the 3V minimum and the drainage limit (K ≤ 167, a grade of at least 0.3 % within 50 ft of the level point) are advisory: a failure is stated, counted and warned but does not make the result fail.
Grades: the design SSD is for level grade, as the Green Book does. Enter ssd_grade_pct (upgrade positive) to design for a grade with Eq 3-3. The SSD on both tangents in both directions of travel is always shown and warned if it is longer than the design SSD.
Inputs are strict: numeric values must be numbers (text is rejected); misspelled or unknown fields are rejected with a suggestion; a null is rejected (leave the field out); values are range-checked and unusual ones are warned. The name is at most 80 characters and meta at most 20 entries. Results are engineering aids; a licensed engineer must review before sealing.
Limits and out of scope: no horizontal sight distance (HSO, offsets on horizontal curves), no intersection sight distance, no decision sight distance (enter its value as sight_distance_ft to size a curve), no sight distance at overhead structures, no unsymmetrical vertical curves (the Green Book requires a graphical check), no compound or reverse curves, no lighting, superelevation or drainage design. The crest and sag length equations are cited by form and by Green Book Sec 3.4.6, not by equation number.
Table 3-2 irregularity: at 30 mph on a 3 % upgrade the printed Table 3-2 value is 200 ft, but Eq 3-3 gives 189.7 ft (190 ft rounded up to 5 ft). The 200 appears in at least four independent reproductions of the table, so it is treated as an irregularity in the Green Book table, not a copying error. This app uses Eq 3-3 (190 ft). Level-grade SSD at 30 mph is 200 ft (Table 3-1), the design basis, so a level-grade design is unaffected.
Result status:pass means at least one gating check ran and all passed; pass with advisory notes means the gating checks passed but N advisory check(s) did not; fail means a gating check failed; NOT EVALUATED means no check ran (for example no grades were entered) and is never a pass.