Sprinkler K-Factor Calculator (Q = K√P, NFPA 13)
Solve sprinkler flow, pressure or K-factor from Q = K√P. The calculation runs in your browser. A free account is needed after 3 calculations and to download results. Saving a project stores the inputs with your account.
Guide: Sprinkler K-Factor
- Load the sample to see typical inputs, then replace every value with your project data.
- Check the units shown next to each input.
- Calculate, then read the step-by-step table and any warnings. Verify the result before using it in a design.
Code basis and design decisions
- Equation: Q = K × √P, Q in gpm, P in psi, K in gpm/psi1/2 (NFPA 13 hydraulic calculation of sprinkler discharge).
- Minimum pressure: NFPA 13 requires at least 7 psi at an operating sprinkler; the app warns below 7 psi. Some listed sprinklers need more: follow the listing.
- Nominal K-factors shown for reference: 1.4 to 33.6 (NFPA 13 nominal K-factor table). A computed K more than 5 % from the nearest nominal value is flagged.
- Metric: K(L/min/bar1/2) = 14.42 × K(US).
Notes & limits
- Solves one sprinkler only. Friction loss, elevation and system balancing need a full hydraulic calculation.
- Enter the K-factor from the sprinkler listing or data sheet, not just the nominal value, for final work.